Martin Mac Aura

 

Martin Mac Aura Rental

Delivery?

Martin Mac Aura

The MAC Aura is an award-winning wash light that lighting designers have turned to the world over due to its versatility as a powerful beam and wash luminaire of the highest caliber. The result of out-of-the-box creative thinking, it is the first LED moving head wash light to combine multicolor beam LEDs with a backlight LED array that takes the synthetic look out of LED wash lights.

  • Single-lens wash with fully premixed color

  • Broad color palette, RGBW color mixing

  • Eye-candy Aura Effects

FEATURES

  • Single-lens wash with fully premixed color

  • Broad color palette, RGBW color mixing

  • Eye-candy Aura Effects™

  • Uniform shades

  • Built-in FX engine

  • 11 to 58° zoom

  • 3850 Lumens output

  • Rapid movement

  • Compact, low weight design (5.6 kg)

  • High efficiency, low power consumption, long lifetime

SPECIFICATIONS

PHYSICAL

  • Length: 302 mm (11.9 in.) across yoke

  • Width: 302 mm (11.9 in.) across yoke

  • Height: 360 mm (14.2 in.), head straight up

  • Weight: 5.6 kg (12.4 lbs.) without accessories

DYNAMIC EFFECTS

  • Beam color mixing: RGBW

  • Aura (secondary lens array illumination) color mixing: RGB

  • Beam color temperature control: CTO, variable 10 000 - 2500 K

  • Beam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random color

  • Beam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effects

  • Pre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combined

  • Electronic dimming: Independent beam and aura, four dimming curve options

  • Pan: 540°Tilt: 232°

  • Pan and tilt speed: Adjustable via onboard control panel and DMX

CONTROL AND PROGRAMMING

Control options: Independent control of beam (primary output) and aura (secondary lens array illumination)Macro programs selectable via DMX: Synchronized beam and aura effectsControl: DMXRDM: ImplementedControl resolution: 8-bit, with 16-bit control of pan & tiltSetting and addressing: Control panel with backlit graphic displayDMX channels: 14/25DMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Transceiver: RS-485Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

OPTICS

  • Zoom range: 11° - 58°

  • Peak angle: One-tenth

  • Light source: 19x 10W RGBW LED Array System

  • LED refresh rate: Beam 1220 Hz, Aura 4395 Hz

  • Binning: Tight color and flux binning

  • Calibration: Full Gamut Color Calibration

  • Minimum LED lifetime: 50,000 hours (to >70% luminous output)**Figure obtained under manufacturer´s test conditions

  • Color Modes: Calibrated Mode and Raw Mode

PHOTOMETRIC DATA

  • Total output: 3850 lumens (zoom at maximum)

CONSTRUCTION

  • Housing: High-impact flame-retardant thermoplastic

  • Color: Black

  • Protection rating: IP20

INSTALLATION

  • Mounting points: One M12 threaded hole for rigging clamp

  • Location: Indoor use only, must be fastened to surface or structure

  • Orientation: Any

  • Minimum distance to combustible materials: 100 mm (4.0 in.)

  • Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

CONNECTIONS

  • AC power input: Neutrik PowerCon

  • AC power throughput: Neutrik PowerCon

  • DMX and RDM data in/out: 5-pin locking XLR

    ELECTRICAL

  • AC power: 100-240 V nominal, 50/60 Hz

  • Power supply unit: Auto-ranging electronic switch mode

  • Main fuse: 5 AT (slow blow)

  • Typical power consumption, all effects static, zero light output: <15 W

  • Maximum total power consumption: 260 W

    TYPICAL POWER AND CURRENT

  • 100 V, 60 Hz: 236 W, 2.4 A, PF 0.994

  • 120 V, 60 Hz: 234 W, 2.0 A, PF 0.992

  • 208 V, 60 Hz: 229 W, 1.2 A, PF 0.970

  • 230 V, 50 Hz: 228 W, 1.1 A, PF 0.959

  • 240 V, 50 Hz: 228 W, 1.0 A, PF 0.953

    *Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

    THERMAL

  • Cooling: Forced air (temperature-regulated, low noise, user-definable levels)

  • Maximum ambient temperature (Ta max.): 40° C (104° F)

  • Minimum ambient temperature (Ta min.): 5° C (41° F)

  • Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

    APPROVALS

  • EU safety: EN 60598-2-17 (EN 60598-1)

  • EN 62471EU EMC: EN 55103-1

  • EN 55103-2,

  • EN 55015,

  • EN 61547

  • US safety: UL 1573

  • US EMC: FCC Part 15 Class A

  • Canadian safety: CSA E598-2-17 (CSA E60598-1)

  • Canadian EMC: ICES-003 Class A

  • Australia/NZ: C-TICK N4241

 

 

The ROGUE ARMY - weapons of mass creation to help your creativity overcome the tyranny of tight budgets! Meet the ROGUE R2 Spot and R2 Beam, two new additions to CHAUVET Professional's army of moving head spot and beam fixtures.